Home > Applications guide > Tin Whiskers Prevention
Mitigate creep, corrosion, dendrites and tin whiskers formation on printed circuit boards
- Prevent tin whiskers and dendrite formation
- Repel water, salt water and oil
- Apply by spray, dip, syringe or dam
- Lower cost than Parylene

PRODUCT DOCUMENTS
Tin Whiskers Background
Sort By:
Page of 1
MicroCure DTO 5-EGC MicroCure DTO 5-EGC

MicroCure DTO 5-EGC is a hydrophobic coating formulated for conformal coating applications. When cured, this coating is over 4H hard with excellent resistance to abrasion, moisture and UV-light. MicroCure is tough, slippery, hydrophobic and oleophobic making it resistant to most exposures and temperatures. MicroCure is applied by dipping or spraying. When well-cured, contact angles to water greater than 95° and roll-off angles of less than 25° can be achieved. The solvent in this version of MicroCure is Isopropyl Alcohol. A version in Butyl-Acetate with longer working time is available.

Our Price: $45.00
PFC410F PFC410F

FluoroPel 410F is a fluoroacrylic copolymer solution in a fluorosolvent for coating circuit board parts in the effort to prevent Tin Whiskers and Dendrites. Films dry in a few minutes at room temperature and provide a surface with a contact angle to water of approximately 100°.  This may be used as a Parylene replacement.  Please contact Cytonix for custom formulations with different solvents and functional properties.

Our Price: $49.00
PFC810E PFC810E

FluoroPel 810E is a fluoroacrylic copolymer solution in a fluoro solvent for coating circuit board parts in the effort to prevent Tin Whiskers and Dendrites. Films dry in a few minutes at room temperature and provide a surface with a contact angle to water of approximately 100°. This may be used as a Parylene replacement. Please contact Cytonix for custom formulations with different solvents and functional properties.

Our Price: $99.00
420-F25M 420-F25M

FluoroPel 420-F25M is a fluoroacrylic copolymer solution in a fluorosolvent for coating circuit board components to prevent corrosion, tin-whiskers and dendrites. Films dry in a few minutes at room temperature and provide a surface with a contact angle to water of approximately 100°.  This may be used as a Parylene replacement.  Please contact Cytonix for custom formulations with different solvents and functional properties.

Our Price: $99.00
PFC420-F25M PFC420-F25M

FluoroPel 420-F25M is a fluoroacrylic copolymer solution in a fluorosolvent at 10% concentration for coating circuit board components to prevent corrosion related failure. Films dry in a few minutes at room temperature and provide a surface with a contact angle to water of approximately 100°.  This may be used as a Parylene replacement.  Please contact Cytonix for custom formulations with different solvents and functional properties.

Our Price: $150.33