|
FluorN
322N is 60% non-ionic, glycol-based
perfluoroalkyl
surfactant with polyethylene glycol that is compatible with many
aqueous and
polar systems. May replace FC171. MSDS
FluorN
474 is an acrylate functional, high
fluorine content
fluorosurfactant compatible with many resin systems. Hydrophobic &
Oleophobic.
FluorN
489 is a methacrylate functional, high
fluorine content
fluorosurfactant compatible with many resin systems. Hydrophobic &
Oleophobic. MSDS
FluorN
561 is a 100% solids, non-reactive, high
fluorine
content, ethylene glycol based polymeric fluorosurfactant compatible
with most
polar solvent based inks, coatings, resists and emulsions. May replace
Fluorad
FC430 or FC171. MSDS (pdf)
FluorN
562 is a 100% solids, non-reactive, ethylene
glycol
based polymeric fluorosurfactant compatible with most polar solvent
based inks,
coatings, resists and emulsions. May replace Fluorad FC430 or FC171. MSDS (pdf)
FluorN
712 is a highly active perfluoroalkyl
stearate
surfactant that is compatible with many non-polar formulations. At
concentrations of 0.0005 to 0.05 percent, the polymer has good
surfactant,
leveling and wetting activity. Adds lubricity and
hydrophobic/oleophobic
properties at higher concentrations. MSDS (pdf)
FluorN
1017 is a
100% solids
di-hydroxy perfluoropolyether (PFPE) surfactant compatible with many
urethanes, anhydrides
and
epoxies. Lubricity,
repellency, weather resistance.
FluorN
1939A
is a highly active 100% solids
perfluoropolyether
caprolactone diacrylate that is compatible with most polar
formulations.
Cationic cure; adds lubricity, repellency, weather resistance.
FluorN
1970A
is a highly active 100% solids
perfluoropolyether
glycol diacrylate that is compatible with most polar
formulations. Adds lubricity, repellency,
weather resistance.
FluorN 2017 is a
100% solids tetra-hydroxy perfluoropolyether (PFPE) surfactant
compatible with many
urethanes, anhydrides
and
epoxies. Lubricity,
repellency, weather resistance.
FluorN
2900N is a
100% solids perfluoropolyether glycol (550) GFG block polymer
surfactant. Soluble in water and polar solvents, with PFPE to
glycol ratio of about 3:1. Lubricity, repellency,
weather resistance.
FluorN
2592 is a highly active polyperfluoroether
stearate
SPS block polymer surfactant that is compatible with many non-polar
formulations. Adds lubricity, repellency and weather resistance.
FluorN
4592 is a highly active polyperfluoroether
stearate
SPS block polymer surfactant that is compatible with many non-polar
formulations. At
concentrations of 0.0005 to 0.05 percent, the polymer has good
surfactant,
leveling and wetting activity. Adds lubricity and hydrophobicity at
higher
concentrations.
FluorN
20158M
is a 50% solids,
non-reactive, non-ionic, high
fluorine content, decane-based polymeric fluorosurfactant compatible
with many
non-polar systems. At low concentrations it is miscable with most
non-polar
solvents, is insoluble in water and forms an air interface with very
low
surface energy. Foaming agent. May replace Fluorad FC740. MSDS
Samples
- Cytonix provides free samples nationally and internationally,
where recipients cover the cost of transportation.
Environmental
- PFOA and PFOS are not used in the manufacture of
Cytonix products. FluoroPel, FluoroSyl, Fluorothane and FluorN are
manufactured using telomer and perfluoropolyether chemistry. All
Cytonix products are TSCA, RoHS, REACH & WEEE compliant.
Trademarks
& Patents
- FluorN,
FluoroSyl,
FluoroPel, Fluorothane, FluoroTAC and PerFluoroCoat are trademarks of
the
Cytonix Corporation. Patents
are issued or pending
for the formulations listed on this page.
|
|
