|
|
FluorAcryl™
6975 -- Hydrophobic, oleophobic coating
with excellent
resistance
to solvents, oils, stains and abrasion.
|
•
Applications: electronic devices, cell phones,
appliances, wood, plastic, metal
• Contact angle to water: > 115°
• Contact angle to mineral oil: > 75°
• Roll-off angle to mineral oil: < 1°
• Stain Resistance (ISO 4211, 5 = no stain): 5, 5, 5, 4
(tea,
coffee, water, iodine)
• Magic Marker (beads up): 100% removed by single alcohol
wipe
• No changes in performance after 1000 alcohol cotton rubs
under
325 grams/ sq-in pressure
• Tabor CS17 1000gram abrasion: < 105 mg after 2000
cycles
• Tabor S33 500 gram wear through: > 115 cycles
• MEK resistance: > 200 double rub cycles
• ASTM D3363 pencil hardness: > 6H
• Pendulum Hardness: (ISO 1522) > 300 seconds
• Reverse Impact (inch/pounds): < 2
• Glass transition point (Tg): > 118°C
|
|
MSDS
INFO
|
|
|
|
FluorAcryl™ 6968
-- Hydrophobic, oleophobic coating
with excellent
resistance
to solvents, oils, stains, UV and abrasion.
|
•
Applications: automobiles, boats, aircraft, wood,
plastic, metal
• Contact angle to water: > 115°
• Contact angle to mineral oil: > 75°
• Roll-off angle to mineral oil: < 1°
• Stain Resistance (ISO 4211, 5 = no stain): 5, 5, 5, 4
(tea,
coffee, water, iodine)
• Magic Marker (beads up): 100% removed by single alcohol
wipe
• No changes in performance after 1000 alcohol cotton rubs
under
325 grams/ sq-in pressure
• No changes in performance after 5 years equivalent of
Equitorial Sun.
• Tabor CS17 1000 gram abrasion: < 87 mg after 2000
cycles
• Tabor S33 500 gram wear through: > 125 cycles.
• MEK resistance: > 200 double rub cycles
• ASTM D3363 pencil hardness: > 8H
• Pendulum Hardness: (ISO 1522) > 300 seconds
• Reverse Impact (inch/pounds): < 2
• Tg: > 148°C
|
|
MSDS
INFO
|
|
|
 |
FluorAcryl™ 2506 -- solvent
stripable
hydrophobic, oleophobic conformal coating with excellent
resistance
to moisture penetration.
|
•
Applications: electronic devices, circuit boards, wood,
metal, plastic
• Contact angle to mineral oils: 75°
• Roll off angle to mineral oil: < 1°
• Tg: > 113°C
• Heat or UV cure. |
|
|
|
|
|
Samples -
Cytonix provides free samples nationally and
internationally,
where recipients cover the cost of transportation.
Environmental -
PFOA and PFOS are not used in the manufacture of
Cytonix products. FluorAcryl, FluoroPel, FluoroSyl, Fluorothane and
FluorN are manufactured using telomer and perfluoropolyether chemistry.
All Cytonix products are TSCA, RoHS, REACH & WEEE compliant.
Trademarks & Patents
- FluorAcryl, FluoroPel, Fluorothane,
FluoroSyl and FluoroTAC are trademarks of Cytonix
(1998-2010) Patents
are issued or pending
for the
formulations listed on this page.
|
|
|
|
