SECTION 1 - PRODUCT IDENTIFICATION

FluorN™ 2017


SECTION 2 - INGREDIENTS

1. INGREDIENTS

Polyhydroxy Perfluoroether
WT %: 100
CAS NO: PROPRIETARY
ACGIH-TLV: NE
OSHA-PEL: NE
VAPOR PRESSURE: NE

The components of this product are in compliance with the chemical notification requirements of TSCA. All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on EINECS.


SECTION 3 - PHYSICAL DATA

BOILING POINT: >200° C
VAPOR PRESSURE: < 0.1 mm Hg
VAPOR DENSITY: ~13
EVAPORATION RATE: ND
SOLUBILITY IN WATER: nil
SPECIFIC GRAVITY: ~1.8
PERCENT VOLITILE: ~100
VISCOSITY: ~400
APPEARANCE: clear liquid
ODOR: odorless
AVERAGE EQUIVALENT WEIGHT: ~500


SECTION 4 - FIRE AND EXPLOSION HAZARD DATA

FLASH POINT: NONE
AUTO IGNITION TEMP: NA
FLAMMABILITY LIMITS: NA
EXTINGUISHING MEDIA: WATER, FOAM, CO2, DRY CHEMICAL
UNUSUAL HAZARDS: Thermal decomposition above 200° C may produce dangerous halogenated products, including HF.
STABILITY: Stable at room temperature. Hazardous polymerization will not occur.
INCOMPATIBILITY: Avoid chemically active metals: Ca, Zn, etc.

SPECIAL FIREFIGHTING PROCEDURES - Do not enter fire area without proper protection.
Fight fire from safe distance/protected location. Use water spray/fog for cooling.
The use of self-contained breathing apparatus is recommended for fire fighters.


SECTION 5 - HEALTH HAZARDS

ACUTE HAZARDS: SLIGHT
CHRONIC HAZARDS: NO
CARCINOGENS: NONE


SECTION 6 - PROTECTIVE EQUIPMENT & CONTROL MEASURES

EYES: As a good industrial hygiene practice, chemical splash goggles should be worn.
SKIN: Gloves should be worn.
INHALATION: At elevated temperatures NIOSH/MSHA approved respiratory protection equipment should be used. DO NOT SMOKE WHILE USING THIS PRODUCT.
ENGINEERING: As a good industrial hygiene practice, aerosol/vapor generation may require local exhaust ventilation.
HYGIENE: As a good industrial hygiene practice, wash hands thoroughly before eating, drinking, smoking.


SECTION 7 - SUGGESTED FIRST AID

EYES: Flush with plenty of water. Call a physician.
SKIN: Wash affected area with soap and water.
INHALATION: If overcome by exposure to decomposition products, remove to fresh air. Call a physician immediately.
INGESTION: Call a physician immediately.


SECTION 8 - SPILL AND DISPOSAL

Collect with absorbant. Ventilate area. Dispose in accord with applicable local, state and federal regulations. Recover if possible. May be incinerated in the presence of combustable materials.


SECTION 9 - PRECAUTIONARY INFORMATION

WARNING: DO NOT SMOKE WHILE USING THIS PRODUCT.


SECTION 10 - DISCLAIMERS

Some of the information presented and conclusions drawn herein are from sources other than direct test data on the product itself. The information in this MSDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. This MSDS has been prepared in accordance with the requirements of the OSHA HAZARD COMMUNICATION SYSTEM (29 CFR 1200).