SECTION 1 - PRODUCT IDENTIFICATION

FluoroPel PFC 1601A & 1604A

SECTION 2 - INGREDIENTS

1. INGREDIENTS Polymer 1-4 %
CAS#: PROPRIETARY
ACCIH-TLV: NONE
OSHA-PEL: NONE
Perfluoro-compounds 99-96 %
CAS#: 86508-42-1
ACCIH-TLV: ND
OSHA-PEL: ND

The components of this product are in compliance with the chemical notification requirements of TSCA. All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on EINECS. Volatile components of Fluoro-Compounds are VOC exempt per Federal Register August 25, 1997 [Volume 62, Number 164]. SECTION 3 - PHYSICAL DATA INITIAL BOILING POINT: 160° C
VAPOR PRESSURE: ~4 mm Hg
VAPOR DENSITY: 12
EVAPORATION RATE: > Butyl Acetate
SOLUBILITY IN WATER: nil
SPECIFIC GRAVITY: ~1.7
VOC: NONE
VISCOSITY: ~10cp
APPEARANCE: clear liquid

ODOR: mild halogen
SECTION 4 - FIRE AND EXPLOSION HAZARD DATA FLASH POINT: NONE
AUTO IGNITION TEMP: NA
FLAMMABILITY LIMITS: NA
EXTINGUISHING MEDIA: WATER, FOAM, CO2, DRY CHEMICAL
UNUSUAL HAZARDS: Thermal decomposition above 200° C may produce dangerous halogenated products, including HF.
STABILITY: Stable at room temperature. Hazardous polymerization will not occur.
INCOMPATIBILITY: Avoid chemically active metals: Ca, Zn, etc.

SPECIAL FIREFIGHTING PROCEDURES: Do not enter fire area without proper protection. Fight fire from safe distance/protected location. Use water spray/fog for cooling. The use of self-contained breathing apparatus is recommended for fire fighters. SECTION 5 - HEALTH HAZARDS ACUTE HAZARDS: NONE EXPECTED.
CHRONIC HAZARDS: NONE EXPECTED.
CARCINOGENS: NONE KNOWN TO BE PRESENT SECTION 6 - PROTECTIVE EQUIPMENT & CONTROL MEASURES EYES: Eye protection such as chemical splash goggles and/or face shield should be worn.
SKIN: Gloves should be worn.
INHALATION: At elevated temperatures NIOSH/MSHA approved respiratory protection equipment should be used. DO NOT SMOKE WHILE USING THIS PRODUCT.
ENGINEERING: Aerosol/vapor generation may require local exhaust ventilation.
HYGIENE: Wash hands thoroughly before eating, drinking, smoking. SECTION 7 - SUGGESTED FIRST AID EYES: Flush with plenty of water. Call a physician.
SKIN: Wash affected area with soap and water.
INHALATION: If overcome by exposure to decomposition products, remove to fresh air. Call a physician immediately.
INGESTION: Call a physician or poison control. SECTION 8 - SPILL AND DISPOSAL Impound/extinguish all ignition sources or blanket with fire-fighting foam. On land, collect with inert absorbant. On water, contain, minimize dispersion and collect. Ventilate area. Avoid breathing vapors. Report per regulatory requirements. Dispose in accord with applicable local, state and federal regulations. SECTION 9 - PRECAUTIONARY INFORMATION WARNING: DO NOT SMOKE WHILE USING THIS PRODUCT. SECTION 10 - DISCLAIMERS Some of the information presented and conclusions drawn herein are from sources other than direct test data on the product itself. The information in this MSDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. This MSDS has been prepared in accordance with the requirements of the OSHA HAZARD COMMUNICATION SYSTEM (29 CFR 1200).
FluorN, FluoroSyl, FluoroPel, Fluorothane, FluoroTAC and PerFluoroCoat are trademarks of the Cytonix Corporation. Patents are issued or pending for the formulations listed on this page, for certain methods of their application , and for the coating of certain articles. Copyright 1997.

Cytonix Corporation
8000 Virginia Manor Road
Beltsville, MD 20705
phone: (888) CYTONIX
fax: (301) 470-6269
email: emailbox@cytonix.com

index.html